Horizontal Balers

5042

image1

Automatic Closed Door Horizontal Baler

Structural Specifications

  • Bale Chamber 42” X 30” X 60”-65”
  • Feed Opening 50” X 42”
  • Baler Width 55”
  • Baler Height (without Hopper)   46”
  • Baler Length 18" 10"
  • Sidewall Thickness ½ inch
  • Approx. Weight 18,000 lbs.

Hydraulic Specifications

  • Motor  25HP
  • Pump High – Low Vane 35 GPM
  • Cylinders Main    8” X 72” X 5”
  • Cylinder (Door) 4” x 6” x 1 ¼
  • Door 4” X 16” X 2”
  • Heat Exchanger Air to Oil

Performance Data

  • Hydraulic System Pressure  3000
  • Platen Force     150,750 lbs.
  • Platen PSI     115 PSI
  • Cycle Time     45 Seconds
  • Bale Size      42” X 30” X 60”- 65”

6460

image2

Standard Features

  • 1/2" Thick Full Sheet Construction
  • Hydralic Door Cylinder
  • 25 HP Tri-Volt 3 Phase
  • Guide Wire Tie Tracks
  • Multiple Use Shear Blade
  • High Efficiency Hydralic Assembly with Regenerative Hydralics
  • Stroke Saver Cycle Feature
  • Nema 4 Rated Enclosures
  • Standard Hopper
  • Full Weld Construction
  • Large Feed Hopper
  • Logic Controlled Operation
  • Dual Level Photo Eyes

Structural Specifications

  • Hopper Opening 60" W x 84" L
  • Feed Chamber 60" W x 64" L
  • Chamber Floor 3/4" Thick Full Sheet Construction
  • Chamber Sidewalls 1/2" Thick Full Sheet Construction
  • Shipping Weight 25,500 lbs. Shipping Weight (11,566 Kg)

Performance Data

  • Main Cylinder 8" Bore x 120" Stroke x 5" Rod (20 cm) (304 cm)
  • Door Cylinder 4" Bore x 6" Sroke
  • Oil Reservoir 160 Gal (605 Liters)
  • Pump 43 Gal. Vane Pump (162 Liters)
  • Motor TEFC 25 HP 208, 220, 480 Volts 3 Phase
  • Hyd. System Pressure 3,000 PSI (207 Bar)
  • Platen Force 150,800 lbs.
  • Platen PSI 83 PSI. (6.0 Bar)
  • Cycle Time Adjustable 30 Sec - 18 Sec Stroke Saver
  • Bale Size 60 x 30 x 48

NF 1050

image3

The  NF 1050 baler is built with the strength you’re looking for when it  comes to baling demanding material in a heavy industrial application.   It is constructed to out perform what others call tough.  All components  are easy to replace, with service in mind.  Featuring an extremely well  designed 10” x 120” main cylinder, and a 7” hard chromed rod, this  cylinder will last in the most demanding situations.  The power of this  equipment makes the baling of Non-Ferrous metals, including, but not  limited to painted aluminum extrusions, radiators, as well as insulated  wire become as easy as baling PET, HDPE and Aluminum cans.

Structural Specifications

  • Sidewall Thickness 5/8”
  • Bale Chamber 42” x 42” x (60-65”)
  • Feed Opening 50” x 42”  with Hopper 76” x 42”
  • Baler Width 55”
  • Baler Height (w/o Hopper) 63”  with Hopper 93”
  • Baler Length 23’ 9”
  • Approx. Weight 36,000lbs

Hydraulic Specifications

  • Motor 50HP
  • Pump High-Low Vane  97 GPM
  • Cylinder (Main) 10” x 120” x7”
  • Cylinder (Door) 4” x 6” x 1 ¼
  • Heat Exchanger Air to Oil

Performance Data

  • Hydraulic System Pressure 3000 PSI
  • Platen Force 235,500 lbs.
  • Platen PSI 130 PSI
  • Cycle Time 26 seconds - 16 seconds (stroke saver)
  • Bale Size 42” x 42” x (60-65”)